RVDM – Economy Mircon Diamond Powder

20+ Years Experience Consistent Batch Quality Customized Solutions

Product Overview

RVDM is an economy-grade monocrystalline micron diamond powder developed for general lapping, pre-polishing and selected resin-bond abrasive applications requiring active cutting and rapid abrasive renewal. Produced from relatively lower-strength HPHT synthetic diamond, its irregular angular morphology and higher friability promote self-sharpening and efficient material removal on ceramics, glass, stone and other hard brittle materials.

Features

Higher Friability: Promotes continuous abrasive renewal and active self-sharpening.
Angular Particle Morphology: Provides active cutting points for efficient material removal.
Lower Relative Crystal Strength: Supports controlled particle breakdown during general lapping and abrasive processing.
Stable Particle Size Distribution: Supports repeatable removal rates and consistent processing behavior.

Specifications

Diamond Type	HPHT Monocrystalline Micron Diamond
Product Series	Monocrystalline Micron Diamond Powder
Grade	RVDM
Grade Direction	Economy / High-Friability Grade
Relative Crystal Strength	Lower
Friability	Relatively High
Particle Morphology	Irregular to angular monocrystalline particles
Selection Focus	Material removal, abrasive renewal and cost control
Typical Processes	Lapping / Pre-Polishing / Selected Resin-Bond Applications

Comparison Table of Micron Diamond Powder Particle Size

China Grade Industry Reference	Nominal Size Range (μm)	Mesh Reference (#)	Typical D50 (μm)
W0.2	0–0.2	80000	0.1
W0.25	0–0.25	60000	0.11–0.20
W0.5	0–0.5	30000	0.20–0.30
W1	0–1	15000	0.6–0.8
W1.5-	0–2	13000	1.0
W1.5	1–2	12000	1.1–1.3
W2.5	1–3	10000	1.6–1.8
W3	2–3	7000	1.9–2.1
W3.5-	2–4	6500	2.2–2.6
W3.5	2–4	6000	2.6–3.0
W4	2–5	5000	3.1–3.4
W5	3–6	4000	3.5–4.5
W6	4–6	3500	4.4–5.0
W7	4–8	3000	5.0–6.0
W10-	4–9	2500	6.1–6.5
W10	5–10	2000	6.5–7.3
W10+	6–12	1800	7.3–8.3
W12	8–12	1600	8.3–9.0
W14-	7–14	1500	9.1–10.5
W14	8–16	1300	10.0–12.0
W20-	10–20	1200	12.5–15.0
W20	12–22	1000	15.0–17.0
W20+	15–25	800	18.0–20.0
W28	20–30	700	20–23
W28+	22–36	600	23–26
W40-	20–40	500	26–29
W40	30–40	450	29–32
W40+	35–45	400	32–36
W50	36–54	320	37–43
325/400 Mesh	—	320	43–48
270/325 Mesh	—	280	48–55
230/270 Mesh	—	240	56–64
200/230 Mesh	—	200	65–73