Grinding discs are collectively referred to as tools that perform the functions of grinding and polishing in the machining process. Grinding discs can be divided into natural grinding discs and man-made grinding discs according to
In order to meet the use of diamond sintering tools, diamond powder need to be performance tested. The main Material Properties of Diamond are wear resistance, thermal stability, impact strength and microstructure. Diamond Shaped Detection
The factors that affect the efficiency and life of diamond saw blades include sawing process parameters, diamond particle size, concentration, and bond hardness. Sawing parameters include blade line speed, sawing concentration and feed speed. Sawing
17nm polycrystalline nanodiamond is a kind of ultra-fine and ultra-dispersed nano-sized diamond (UFDD) prepared by special processes. This nanodiamond can be suspended in water for a long time without precipitation. The particle size distribution can
Mono-crystal Flake Nano-size Diamond The mono-crystal flake nano-size diamond is a new type of nano diamond. Its morphology IS flake and with mono-crystal structure. The specific characterization is as follows: Transmission Electron Microscopy (TEMD) D50/MEDIUM=147nm
Abstract： Grinding paste is a kind of surface precision machining. The surface roughness of the workpiece can be improved by using the grinding effect of abrasive paste. The diamond grinding paste is used to grind
Generally, powdery materials with a particle size of fewer than 54 microns are called micro powder, and those with a particle diameter of fewer than 5 microns are called fine powders. The particles larger than
Abstract: The bond strength of binder and diamond grits in metal-based diamond tools, the state of diamond cutting edge, and the performance and life of diamond tools have important influences. The bond strength between the
According to the characteristics and processing requirements of hard and brittle materials, the round micron diamond powder was produced by a special shaping process to round and roughen the particles to ensure that each particle
Superabrasives have always been called “industrial teeth” in the field of industrial production, and are used in the manufacture, grinding, grinding and polishing of almost all industrial products. This article summarizes the important manufacturers and
We are experts in Synthetic Diamond Powder for cutting, griding and polishing. lf you think you have a problem with it call us for a free, no-obligation quote.
Send us a message if you have any questions or request a quote. We will be back to you ASAP.
